The JBL Tune 120TWS is a fantastic piece of technology that brings music lovers the joy of wireless listening combined with the signature JBL sound quality. However, connecting these true wireless earbuds can sometimes be a bit tricky, especially for new users. In this comprehensive guide, we will walk you through every step of connecting your JBL Tune 120TWS to various devices, troubleshooting common connection issues, and optimizing your listening experience.
Understanding Your JBL Tune 120TWS
Before diving into the connection process, it’s vital to understand the features and specifications of the JBL Tune 120TWS. This knowledge will not only prepare you for using the earbuds but also help you troubleshoot any issues that may arise.
Key Features of JBL Tune 120TWS
The JBL Tune 120TWS offers an array of features designed to enhance your listening experience:
- True Wireless Design: Enjoy complete freedom of movement without tangled wires.
- Signature JBL Sound: Experience rich audio quality that brings your favorite tracks to life.
- Up to 16 Hours of Battery Life: The earbuds provide up to 4 hours of playtime on a single charge, with an additional 12 hours from the charging case.
- Built-in Microphone: Take calls easily with the hands-free call feature.
- Ergonomic Fit: Designed for comfort to ensure a snug fit during extended listening.
What You Will Need
To connect your JBL Tune 120TWS successfully, you will need the following:
- JBL Tune 120TWS earbuds
- A smartphone or device with Bluetooth capabilities
- A fully charged JBL Tune 120TWS case
Preparing Your JBL Tune 120TWS for Connection
Before connecting your JBL Tune 120TWS to a device, follow these steps to prepare the earbuds for pairing:
Step 1: Charge Your Earbuds
Ensure that your JBL Tune 120TWS is fully charged. Place the earbuds inside the charging case and connect the charging cable to a power source. The LED light on the case will indicate the charging status.
Step 2: Remove Earbuds from the Charging Case
To initiate pairing, remove both earbuds from the charging case. You will notice that they automatically turn on. If they do not power on, press and hold the touch-sensitive buttons on both earbuds for about 3 seconds.
Connecting JBL Tune 120TWS to Your Device
Now that your JBL earbuds are powered on and ready to go, it’s time to connect them to your smartphone or other Bluetooth-enabled devices.
For Android Devices
Follow these steps to connect your JBL Tune 120TWS with an Android smartphone:
Step 1: Enable Bluetooth on Your Android Device
Navigate to your device’s settings. Look for the Bluetooth option and toggle it on. Your device will begin searching for available Bluetooth devices.
Step 2: Connect to JBL Tune 120TWS
In the list of available devices, find and select “JBL Tune 120TWS.” Once connected, you will hear a confirmation sound through the earbuds. The LED light will change from blinking to solid, indicating a successful connection.
For iOS Devices
Connecting to an Apple device is equally straightforward. Here’s how:
Step 1: Open Bluetooth Settings on iPhone/iPad
On your iPhone or iPad, open the Settings app, then navigate to Bluetooth. Make sure Bluetooth is enabled.
Step 2: Pair Your JBL Tune 120TWS
In the Bluetooth menu, find “JBL Tune 120TWS” from the list of available devices. Tap to connect, and you will hear a “connected” prompt in the earbuds, with the LED light indicating a successful pairing.
Connecting to Windows PC
If you want to connect your JBL Tune 120TWS to your Windows PC, follow these steps:
Step 1: Access Bluetooth Settings
Go to the Settings menu on your Windows PC, click on “Devices,” and then select “Bluetooth & other devices.”
Step 2: Add Bluetooth or Other Device
Click on “Add Bluetooth or other device” and select “Bluetooth.” From the list, click on “JBL Tune 120TWS” to connect. A successful connection will result in an audio confirmation in the earbuds.
Troubleshooting Common Connection Issues
Sometimes, various factors can hinder the connectivity of your JBL Tune 120TWS. Below are some common issues and their solutions:
Issue 1: Earbuds Not Discoverable
If your JBL Tune 120TWS does not appear in the Bluetooth list:
- Ensure the earbuds are fully charged.
- Ensure they are powered on and not connected to another device. You can hold the touch-sensitive buttons for about 5 seconds to reset the connection.
Issue 2: Audio Quality Problems
If you experience cracking or choppy audio:
- Move closer to the connected device to ensure a strong Bluetooth signal.
- Check if any software updates are available for your device to improve Bluetooth performance.
Enhancing Your Listening Experience
Once your JBL Tune 120TWS is connected, you can optimize the listening experience through various settings and features:
Adjust Audio Settings
Depending on your device, you can enhance your sound quality by adjusting the audio settings in your device. Consider using an equalizer app to customize the sound profile according to your preferences.
Utilize Voice Assistants
JBL Tune 120TWS works seamlessly with voice assistants like Google Assistant and Siri. To activate the voice assistant feature, double-tap the right earbud. This allows you to access music controls, get updates, and more without needing to touch your device.
Managing Calls
Using the built-in microphone, you can take incoming calls hands-free. Tap the right earbud to answer, and a double-tap on the same earbud will hang up the call.
Conclusion
Understanding how to connect your JBL Tune 120TWS is essential for getting the most out of your listening experience. By following the steps outlined above, you can easily pair your earbuds to various devices. Remember to troubleshoot common issues if you encounter challenges along the way. With your JBL Tune 120TWS connected, step into a world where high-quality audio meets complete mobility and comfort. Enjoy your favorite music, podcasts, and calls with ultimate freedom!
How do I charge my JBL Tune 120TWS earbuds?
To charge your JBL Tune 120TWS earbuds, first place them inside the charging case. Ensure that the earbuds make proper contact with the charging pins located in the case. The LED indicators on the front of the case will help you determine the charging status. A steady red light indicates that the earbuds are charging, while a white light signifies that they are fully charged.
It is recommended to use the original charging cable that comes with the earbuds for optimal charging. Connect the charging case to a power source using a USB charger or a power bank. The full charging time for the earbuds is approximately 2 hours, providing you with up to 4 hours of playback time on a single charge, with additional charges available from the case.
How do I connect my JBL Tune 120TWS to my smartphone?
To connect your JBL Tune 120TWS to your smartphone, begin by ensuring that Bluetooth is enabled on your device. Remove the earbuds from the charging case, and they will automatically power on. Once powered on, they will enter pairing mode, which is indicated by the blinking white light on either earbud.
On your smartphone, navigate to the Bluetooth settings and look for available devices. You should see “JBL Tune 120TWS” in the list. Tap on it to connect. Once connected, you will receive a confirmation tone from the earbuds, and the LED light will turn solid white, indicating a successful connection.
What should I do if my JBL Tune 120TWS earbuds won’t connect?
If your JBL Tune 120TWS earbuds won’t connect, the first step is to ensure that they are charged. Place them back in the charging case and allow them to charge for a few minutes. Once charged, take them out to enter pairing mode again. If the earbuds remain unresponsive, try resetting them by holding the power button on both earbuds until the LED flashes orange, then turns off.
Another useful approach is to check your smartphone’s Bluetooth settings. If the earbuds are still listed among the connected devices, select “Forget” or “Remove” to delete them, then attempt to reconnect from scratch. Additionally, ensure that no other devices are interfering. Sometimes, turning off Bluetooth on other nearby devices can help establish a successful connection.
Can I use one earbud at a time with the JBL Tune 120TWS?
Yes, you can use one earbud at a time with the JBL Tune 120TWS. This feature is particularly useful for those who wish to remain aware of their surroundings or prefer a more discreet listening experience. To do this, simply take one earbud from the charging case, and it will automatically connect to your device. The other earbud will remain in the case and can be used later.
When using a single earbud, you can still control music playback and calls using the touch controls present on that earbud. Keep in mind that if you choose to use the right earbud only, it will serve as the primary earbud, and you will need to put it back into the case to connect the left one when you wish to use it again.
How do I update the firmware for my JBL Tune 120TWS earbuds?
Updating the firmware of your JBL Tune 120TWS earbuds can help improve performance and add new features. To check for firmware updates, you will need to download the JBL Headphones app from your device’s app store. Once installed, open the app and connect your earbuds via Bluetooth.
The app will automatically detect if there are any available updates for your earbuds. If an update is found, follow the on-screen instructions to download and install it. Make sure that your earbuds are charged sufficiently and within Bluetooth range during this process to ensure a smooth update.
How do I clean my JBL Tune 120TWS earbuds?
Cleaning your JBL Tune 120TWS earbuds is essential for maintaining sound quality and hygiene. Start by removing the silicone ear tips from the earbuds and washing them with warm, soapy water. Avoid using harsh chemicals or submerging the earbuds themselves in water. Instead, use a soft, dry cloth to clean the exterior parts of the earbuds gently.
For the charging case, use a slightly damp cloth to wipe the inside and outside, ensuring that no moisture enters the charging ports. Regular cleaning will prolong the life of your earbuds and enhance your listening experience, preventing debris from affecting sound quality or causing discomfort while wearing them.
What is the battery life of the JBL Tune 120TWS?
The JBL Tune 120TWS earbuds provide a playback time of up to 4 hours on a single charge. When combined with the charging case, this can extend the total listening time up to 12 hours. The charging case acts as a portable power bank, allowing you to charge the earbuds multiple times while on the go, making them suitable for all-day use.
To maximize battery life, it is advisable to store the earbuds in the charging case when not in use. Additionally, turning off Bluetooth when not connected and avoiding extremes in temperature can help preserve battery performance over time.